
03
Nov
Kiln rollers: the right roller for the right zone
in News
Comments
In roller kilns, roller selection usually comes up when a problem appears: rollers sagging at high temperature, flatness deviations in large formats, thermal-shock breakages in the rapid cooling zone, and the roller-change stoppages that follow.
The RSB kiln rollers of our Spain-based solution partner Barraganes Grupo SL are selected by kiln zone, firing temperature and product size/thickness rather than using a single roller type throughout:
- RSB SX: for production up to 1210°C and standard thicknesses.
- RSB 400 HT: 80% Al₂O₃ with ZrO₂ addition; according to the technical catalogue, bending strength of ≥70 MPa at 1250°C. For firing above 1210°C, thick products and formats of 60×120 cm and larger.
- RSB 2000: SiC-containing, thermal-shock resistant roller for the rapid cooling zone.
- Vector correction rollers: rollers with a controlled camber in the middle section, designed for a specific size and deformation profile based on the kiln data.
For deformation issues, we carry out a technical assessment together with our partner based on the producer’s kiln data to determine the right roller combination.