Kyocera KJ4 Printhead Cleaning and Testing: KJ4A, KJ4B, KJ4C

The Kyocera KJ4 series is widely used in single-pass lines thanks to its high 600 and 1200 dpi resolution and high nozzle count. High nozzle density means that even a single blockage can produce a visible line in the print. Cleanjector works with recipes matched to the ink type for KJ4A (UV), KJ4B (water-based) and KJ4C (oil-based) heads.

Supported Kyocera printheads

Main Kyocera models that can be processed with Cleanjector and Inktester Digital:

ModelNozzles
KJ4A-TA2,656
KJ4A-AA2,656
KJ4A-RH2,656
KJ4A-3002,656
KJ4B-QA2,656
KJ4B-YH2,656
KJ4B-3002,656
KJ4B-12005,312
KJ4B-EX1200-RC5,312
KJ4C-03601,568

Other supported models: KJ4B-600-EX.

Technical data from the head manufacturer and People & Technology; the model list may change as it is updated.

Common problems with Kyocera heads

Missing nozzles and lines

Dried or settled ink blocks nozzles, causing lines, colour shifts and missing patterns.

  • Gaps in the nozzle test
  • Jet deviation
  • Reduced drop volume

Ink changeover

When switching to another ink or supplier, residues of the old ink may be incompatible with the new one.

  • Controlled flushing
  • Compatible cleaning fluid
  • Testing after changeover

Long stoppages

Ink drying and pigment settling in the head during maintenance and downtime.

  • Pre-flushing and protection
  • Safe storage
  • Priming before restart

Incorrect cleaning

Pressure above the manufacturer’s limits, unsuitable solvents or cleaning under power can cause permanent damage.

  • Model-specific recipe
  • No power to the head
  • Pressure and vacuum control
Kyocera printhead cleaning Cleanjector
People & Technology

Cleaning Kyocera heads with Cleanjector

Cleanjector controls pressure, vacuum, flow direction, temperature, time and ultrasound according to the Kyocera head model. Cleaning is carried out with closed-loop filtration and backflush; no power is applied to the head during cleaning.

  • Recipes and adapters specific to Kyocera models
  • Oil, solvent, water-based and UV inks
  • Up to 93% recovery of heads in suitable condition with ceramic inks

Printhead cleaning People & Technology

Kyocera printhead testing Inktester Digital
People & Technology

Measurable results with Inktester Digital

Whether a cleaned Kyocera head is ready to return to the line is tested in the lab without stopping production. The same platform is used for new ink approval and incoming head inspection.

  • Nozzle, drop and waveform checks
  • Before / after cleaning comparison
  • Head lifetime tracking

People & Technology

Frequently asked questions

Can a clogged Kyocera printhead be cleaned?

A significant share of Kyocera heads without electrical or mechanical damage can be returned to production through controlled cleaning with a model-specific recipe. The head condition is verified by testing before and after cleaning.

What should be considered when cleaning Kyocera heads?

The manufacturer’s pressure and temperature limits must not be exceeded, a cleaning fluid compatible with the ink must be used and no power must be applied to the head during cleaning. Cleanjector controls these parameters automatically according to the head model.

How do you know a cleaned Kyocera head is sound?

Inktester Digital checks nozzle condition, drop formation and waveform; comparing results before and after cleaning shows objectively whether the head is ready to return to the line.

Heads running which inks can be cleaned?

Recipes are available for heads running oil-based (including ceramic), solvent-based, water-based and UV inks. The cleaning fluid is selected according to the ink used.

When does a printhead cleaning system pay back?

Payback depends on annual head consumption and the number of heads recovered; in high-consumption plants it drops to around 6–8 months. We calculate it with your head consumption data.

Let’s plan cleaning and testing for your Kyocera heads

Share your head model, ink type and annual head consumption; we will evaluate the right solution and payback together.

Contact us People & Technology