Composite Fabric Types and Selection: A Guide to Carbon, Glass and Aramid Fabrics

The performance of a composite part starts with the dry fabric. Fibre type defines the basic properties of the part, weave and areal weight define lay-up behaviour and laminate quality, and the finish defines the strength of the bond with the resin. This guide summarises the main criteria for selecting composite fabrics.

1. Fibre type

Carbon fibre

High stiffness and strength, low weight. Standard, IM and HM modulus options.

  • Lightweight structural parts
  • Aerospace and UAV
  • Automotive and motorsport

Glass fibre (E-glass, S2-glass)

Balance of strength, impact resistance, electrical insulation and cost.

  • General composites
  • Electronic laminates
  • Defence (S2-glass)

Aramid

Low density, high impact and cut resistance.

  • Ballistic protection
  • Impact zones
  • Lightweight structures

2. Weave

Plain

Interlaced at every crossing; the most stable and balanced weave.

  • Easy cutting and lay-up
  • Flat parts

Twill

Better drapeability and a characteristic pattern.

  • Curved parts
  • Visible surfaces

Satin

Low crimp, high drapeability.

  • Sharp profile changes
  • High mechanical efficiency

UD and basket

For directional reinforcement or specific designs.

  • Reinforcement in load direction
  • Special applications

3. Areal weight, thickness and yarn count

  • Areal weight (g/m²): the same weight can be achieved with different yarn counts and constructions, which changes fabric stability, crimp and mechanical performance.
  • Yarn count (tex): the mass in grams of 1,000 m of yarn; Tex 34 means 1,000 m of yarn weighs 34 g.
  • Construction: the number of warp and fill ends per cm; it affects stability and lay-up behaviour.
  • Thickness: technical fabrics range from 0.02 mm to over 1 mm.

4. Surface finish

  • Why it matters: the finish defines the chemical bond between fibre and resin; a wrong choice reduces laminate performance.
  • Glass fabrics: A1100 for epoxy and phenolic resins; 112 finish (heat-cleaned) for silicone systems.
  • Aramid fabrics: scoured surface; water repellent treatment (WRT) for ballistic applications.
  • Heat cleaning: causes some loss of tensile strength; a subsequent finish recovers part of it.

5. Process and resin

  • Process: resin flow and drapeability matter differently in hand lay-up, vacuum infusion, RTM and press moulding.
  • Resin system: the finish is selected for epoxy, polyester, vinyl ester, phenolic or silicone systems.
  • Existing specification: the data sheet or specification of the fabric you use is the fastest starting point for identifying an equivalent.

Frequently asked questions

What types of composite fabric are there?

By fibre: carbon fibre, glass fibre (E-glass, S2-glass) and aramid fabrics; by weave: plain, twill, satin, basket and UD fabrics.

Should I choose carbon or glass fibre?

Choose carbon fibre when high stiffness and low weight are the priority; choose glass fibre when cost, impact resistance and electrical insulation matter most.

What is dry fabric?

A woven fabric without resin. The resin is added during part production in processes such as hand lay-up, vacuum infusion or RTM.

How do I choose the areal weight?

Based on target laminate thickness, number of plies, part geometry and mechanical requirements. Thin fabrics conform better to complex geometries; heavier fabrics reduce the number of plies.

Do you support fabric selection?

Yes. Share your application, process and the details of the fabric you use; together with Gividi’s technical team we identify the right fabric and provide technical data and samples.

Let’s select the right fabric for your project

Share your application, process and the details of the fabric you use; we will get back to you with technical catalogue information, samples and a quotation.

Request a quote and samples Gividi Fabrics