Xaar Printhead Cleaning and Testing: 1003 GS12, GS6, GS40 and 2001+

Xaar 1001, 1002 and 1003 series heads, led by the Xaar 1003 GS12, have been used for many years in ceramic and other industrial inkjet lines; Xaar 2001+ is the new generation of this family with twice the nozzle count. The GS6, GS12 and GS40 codes indicate the smallest drop volume (pl). Cleanjector works on Xaar heads with model-specific recipes, backflush and closed-loop filtration.

Supported Xaar printheads

Main Xaar models that can be processed with Cleanjector and Inktester Digital:

ModelNozzles
1003 GS6 / GS6C1000
1003 GS12 / GS12C1000
1003 GS40 / GS40C1000
1001 GS6 / GS121000
1002 GS6 / GS12 / GS401000
2001+ GS6C / GS6U2000
2001+ GS12C / GS12U2000
2001+ GS40C / GS40U2000

Other supported models: 2001 GS12C, Xaar Aquinox GS6 and GS12, Xaar Nitrox Core, Pro and Elite.

Technical data from the head manufacturer and People & Technology; the model list may change as it is updated.

Common problems with Xaar heads

Missing nozzles and lines

Dried or settled ink blocks nozzles, causing lines, colour shifts and missing patterns.

  • Gaps in the nozzle test
  • Jet deviation
  • Reduced drop volume

Ink changeover

When switching to another ink or supplier, residues of the old ink may be incompatible with the new one.

  • Controlled flushing
  • Compatible cleaning fluid
  • Testing after changeover

Long stoppages

Ink drying and pigment settling in the head during maintenance and downtime.

  • Pre-flushing and protection
  • Safe storage
  • Priming before restart

Incorrect cleaning

Pressure above the manufacturer’s limits, unsuitable solvents or cleaning under power can cause permanent damage.

  • Model-specific recipe
  • No power to the head
  • Pressure and vacuum control
Xaar printhead cleaning Cleanjector
People & Technology

Cleaning Xaar heads with Cleanjector

Cleanjector controls pressure, vacuum, flow direction, temperature, time and ultrasound according to the Xaar head model. Cleaning is carried out with closed-loop filtration and backflush; no power is applied to the head during cleaning.

  • Recipes and adapters specific to Xaar models
  • Oil, solvent, water-based and UV inks
  • Up to 93% recovery of heads in suitable condition with ceramic inks

Printhead cleaning People & Technology

Xaar printhead testing Inktester Digital
People & Technology

Measurable results with Inktester Digital

Whether a cleaned Xaar head is ready to return to the line is tested in the lab without stopping production. The same platform is used for new ink approval and incoming head inspection.

  • Nozzle, drop and waveform checks
  • Before / after cleaning comparison
  • Head lifetime tracking

People & Technology

Frequently asked questions

Can a clogged Xaar printhead be cleaned?

A significant share of Xaar heads without electrical or mechanical damage can be returned to production through controlled cleaning with a model-specific recipe. The head condition is verified by testing before and after cleaning.

What should be considered when cleaning Xaar heads?

The manufacturer’s pressure and temperature limits must not be exceeded, a cleaning fluid compatible with the ink must be used and no power must be applied to the head during cleaning. Cleanjector controls these parameters automatically according to the head model.

How do you know a cleaned Xaar head is sound?

Inktester Digital checks nozzle condition, drop formation and waveform; comparing results before and after cleaning shows objectively whether the head is ready to return to the line.

Heads running which inks can be cleaned?

Recipes are available for heads running oil-based (including ceramic), solvent-based, water-based and UV inks. The cleaning fluid is selected according to the ink used.

When does a printhead cleaning system pay back?

Payback depends on annual head consumption and the number of heads recovered; in high-consumption plants it drops to around 6–8 months. We calculate it with your head consumption data.

Let’s plan cleaning and testing for your Xaar heads

Share your head model, ink type and annual head consumption; we will evaluate the right solution and payback together.

Contact us People & Technology