Frequently asked questions about production technologies, digital printhead cleaning, ceramic production, composite fabrics and spare parts sourcing. If your question is not here, contact us.
General
What does Ark Trade do?
Ark Trade (Ark Seramik İnşaat Maden Ltd. Şti.) is an engineering and solution-partner company based in Ankara since 2015. It supplies machinery, systems, raw materials, consumables and spare parts from European technology manufacturers to producers in Türkiye, and provides technology selection, design, engineering, project management, commissioning and after-sales technical support.
Which industries do you serve?
Ceramics (floor and wall tiles, porcelain, sanitaryware) is our strongest field. We also work with manufacturers in composites, defence and aerospace, glass, mining, packaging and corrugated board, printing and signage, textiles, pharmaceuticals, food and agriculture.
Which European manufacturers do you represent in Türkiye?
Vibrotech / Certech (Italy – screening, iron removal, glaze and ink transfer), Trebax (Italy – isostatic press moulds and punches), Studio 1 Automazioni Industriali (Italy – end-of-line automation, palletising, robotics, mesh application lines), People & Technology (Spain – printhead cleaning and testing systems), Gividi Fabrics (Italy – technical reinforcement fabrics and fibreglass mesh), Esmalglass-Itaca / Altadia (Spain – frits, glazes, stains and digital inks) and Barraganes (Spain – kiln rollers and grinding media).
Digital printhead cleaning and testing
Why do ceramic inkjet printheads clog?
The most common cause of nozzle blockage is particles in the ink system: debris left from installation, wear inside the system, filter changes and particles collecting in tank corners. Sedimentation of highly pigmented inks, air bubbles in the ink and incorrect manual cleaning also cause missing nozzles. Missing nozzles that are not addressed early tend to multiply and end up as rejected tiles.
Can a clogged printhead be cleaned and reused?
Yes – if the head is not physically damaged, it can usually be recovered. Our partner People & Technology’s Cleanjector system cleans heads with model-specific recipes and adapters, controlling pressure, vacuum, flow direction, temperature, time and ultrasound with closed-circuit filtration. No power is applied to the head during cleaning. It works with oil, solvent, water-based and UV inks, with recovery rates of up to 93% on suitable heads.
What is the difference between professional head cleaning and simple flushing devices?
What matters in head cleaning is not the hardware but the correct pressure, flow and time for each head model. Simple devices that apply uncontrolled force can damage the nozzle plate and internal channels. Cleanjector recipes are developed together with printhead manufacturers; Seiko Instruments’ first European Demo Centre is located at People & Technology’s facility in Spain.
How can printhead and ink performance be tested without stopping production?
With Inktester Digital, head and ink tests are carried out off-line in the laboratory. Waveform, voltage, drop size, binary/greyscale printing, pressure, vacuum, meniscus, ink and head temperature and belt speed can be adjusted. It works with Seiko, Xaar, Fujifilm Dimatix, Toshiba, Konica Minolta, Ricoh, Kyocera and Epson heads, and a head change takes less than two minutes. Measuring before and after cleaning gives an objective report of recovery.
Which industries use printhead cleaning?
Every industry that uses industrial inkjet: ceramic tiles, corrugated board and packaging, textiles, wood and laminates, PVC and edge banding, decorative surfaces, glass and labelling. Cleanjector has more than 500 installations worldwide at ink manufacturers, machine builders and end users.
How quickly does a printhead cleaning investment pay back?
Payback depends on annual head consumption and the number of heads recovered. In plants running many digital printers with high head consumption, payback is typically around 6–8 months. We can prepare a calculation based on your printer and head data.
Ceramic production
What causes black spots and iron stains on tiles, and how can they be prevented?
Iron particles and oversized grains entering slip, engobe and glaze during preparation appear after firing as black spots, pinholes and surface defects. Prevention starts in the preparation department with proper screening and iron removal: vibrating screens for powders, liquids and glazes, and magnetic and electromagnetic iron removers for slip, engobe, glaze and recovered water. Vibrotech’s DEMOVER series features automatic cleaning.
What are the benefits of an isostatic press mould?
In isostatic moulds, oil behind the punch distributes the pressing force evenly over the whole surface. This compensates for differences in powder filling and reduces density and thickness variations, cutting problems and rejects. In Trebax T-LAP punches the oil circulates under the membrane, so it leaves no marks on the tile surface; the isostatic base lasts for many years and only the punch is renewed at later replacements.
How is the right kiln roller grade selected?
The choice depends on firing temperature, product thickness, tile size and the roller’s position in the kiln. In general, standard alumina rollers are sufficient up to 1210°C at standard thickness. At higher temperatures, for thick products and for large formats of 60×120 and above, grades with high bending strength at high temperature (such as Barraganes RSB 400 HT) are preferred. SiC-containing rollers are used in the rapid cooling zone for thermal shock resistance.
Can tile deformation in the kiln be corrected with rollers?
First, roller geometry and straightness in the high-temperature zone are checked; if needed, wall thickness and roller grade are upgraded and SiC rollers are used in the rapid cooling zone. If this is not enough, correction rollers designed with a controlled central camber for a specific tile size and deformation pattern (Barraganes Vector) can be applied. The design requires the zone where deformation starts, temperature, tile size, thickness and the direction of deformation.
Why is fibreglass mesh applied to large tiles and slabs?
Fibreglass mesh bonded to the back increases strength during handling, cutting and processing, especially for large and thin slabs; it dampens vibration and reduces the risk of breakage. We supply Gividi Fabrics’ tile-backing mesh together with Studio 1’s lines that apply the mesh automatically.
Composites, defence and packaging
What is the difference between E-glass, S2-glass and carbon fabrics?
E-glass is a general-purpose glass fibre with a good cost/performance balance. S2-glass offers higher tensile strength and impact resistance, which is why it is preferred in defence, ballistic protection and aerospace. Carbon fabric provides the highest stiffness at low weight. As the Turkish representative of the Italian technical fabric manufacturer Gividi Fabrics, we supply these fabrics to the composites, defence and aerospace industries.
Water-based or UV-LED inks for digital printing on corrugated board?
Water-based inks work well on uncoated, porous board and are advantageous for recyclability. UV-LED inks cure instantly on coated and uncoated surfaces and offer high resistance to rubbing and environmental factors. Esmalglass-Itaca’s Itaca Digital range offers both technologies, together with a water-based primer for UV-LED and protective coatings.
Vibrating sieves and iron removers (magnetic filters)
What does a vibrating sieve do?
A vibrating sieve separates oversize particles, agglomerates and foreign matter from materials such as glazes, engobes, slip, spray-dried powder and food or pharmaceutical powders. This protects product quality and downstream equipment (pumps, nozzles, printheads, presses) and reduces production stoppages.
What makes Vibrotech vibrating sieves different?
The body is made of 2 mm AISI 304 L stainless steel; pickling and passivation are used instead of sandblasting, and welds are plasma welded. SKF motors, tested for 600 hours in salt spray, draw about half the current of comparable motors. The sieves are made in Italy and come with a 24-month warranty.
In which industries are vibrating sieves used?
The main applications are glaze, engobe, slip and spray-dried powder screening in ceramics; screening of powders and liquids such as flour, sugar, milk powder and spices in food; and screening of APIs, excipients and granules in GMP environments in pharmaceuticals. See our ceramic, food and pharmaceutical pages for details.
Why is an iron remover (magnetic filter) needed?
Iron and metal particles that enter raw materials and the process cause black spots and stains after firing in ceramics, and wear and blockages in equipment. Magnetic filters retain these particles in liquid and powder lines, protecting product quality and reducing rejects.
Which magnetic separators are used for liquid and powder lines?
For slip and glazes, WHI-FILTER with matrix magnetisation and automatic backflush cleaning; for slip, glaze, engobe and recovered water, magnetic and electromagnetic DEMOVER and liquid filters working by gravity, under pressure or by overflow. For spray-dried powder and granules, CEM ULTRA and CEM PLUS with neodymium magnets and automatic cleaning; for powder lines, GM 1/300 with automatic roller cleaning.
How are sieve meshes replaced?
Correct tension and proper bonding of the mesh are important for screening efficiency and mesh life. Vibrotech’s semi-automatic mesh tensioning machine stretches and bonds meshes onto any type of frame quickly and repeatably; we also supply spare meshes and frames.
What information is needed for a sieve or iron remover quotation?
The material to be screened or filtered, hourly capacity, density and viscosity for liquids, required mesh opening or particle size, temperature and installation point (on tank, in line, pneumatic conveying, etc.). With this information we define the right model together with Vibrotech’s technical team.
Spare parts and how we work
How does spare parts sourcing work?
For kilns, presses, glazing lines, digital printers and packing lines, we offer original, equivalent or made-to-drawing parts through our partners in Italy and China. Send us the part number, photos, machine make/model and quantity, and we will compare the options by lead time and cost.
What information is needed for a quotation or technical evaluation?
The current problem or target (capacity, quality, maintenance, efficiency, cost), product type and sizes, line and machine details, and photos or production data if available. You can send them via our contact form or info@arktrade.com.tr; where needed, we carry out an on-site evaluation together with our partner.