Toshiba Printhead Cleaning and Testing: CF1B, CF1BL, CF1BXL, CF3

Toshiba CF series heads, with their ink recirculation design and wide drop ranges, are preferred in industrial lines running UV and oil-based inks. In large-drop versions such as the CF1BXL, blockages caused by pigment settling and drying are common. Cleanjector works with model-specific recipes for Toshiba heads.

Supported Toshiba printheads

Main Toshiba models that can be processed with Cleanjector and Inktester Digital:

ModelNozzles
CF1B636
CF1BL636
CF1BXL636
CF31278
CF3R639×2

Technical data from the head manufacturer and People & Technology; the model list may change as it is updated.

Common problems with Toshiba heads

Missing nozzles and lines

Dried or settled ink blocks nozzles, causing lines, colour shifts and missing patterns.

  • Gaps in the nozzle test
  • Jet deviation
  • Reduced drop volume

Ink changeover

When switching to another ink or supplier, residues of the old ink may be incompatible with the new one.

  • Controlled flushing
  • Compatible cleaning fluid
  • Testing after changeover

Long stoppages

Ink drying and pigment settling in the head during maintenance and downtime.

  • Pre-flushing and protection
  • Safe storage
  • Priming before restart

Incorrect cleaning

Pressure above the manufacturer’s limits, unsuitable solvents or cleaning under power can cause permanent damage.

  • Model-specific recipe
  • No power to the head
  • Pressure and vacuum control
Toshiba printhead cleaning Cleanjector
People & Technology

Cleaning Toshiba heads with Cleanjector

Cleanjector controls pressure, vacuum, flow direction, temperature, time and ultrasound according to the Toshiba head model. Cleaning is carried out with closed-loop filtration and backflush; no power is applied to the head during cleaning.

  • Recipes and adapters specific to Toshiba models
  • Oil, solvent, water-based and UV inks
  • Up to 93% recovery of heads in suitable condition with ceramic inks

Printhead cleaning People & Technology

Toshiba printhead testing Inktester Digital
People & Technology

Measurable results with Inktester Digital

Whether a cleaned Toshiba head is ready to return to the line is tested in the lab without stopping production. The same platform is used for new ink approval and incoming head inspection.

  • Nozzle, drop and waveform checks
  • Before / after cleaning comparison
  • Head lifetime tracking

People & Technology

Frequently asked questions

Can a clogged Toshiba printhead be cleaned?

A significant share of Toshiba heads without electrical or mechanical damage can be returned to production through controlled cleaning with a model-specific recipe. The head condition is verified by testing before and after cleaning.

What should be considered when cleaning Toshiba heads?

The manufacturer’s pressure and temperature limits must not be exceeded, a cleaning fluid compatible with the ink must be used and no power must be applied to the head during cleaning. Cleanjector controls these parameters automatically according to the head model.

How do you know a cleaned Toshiba head is sound?

Inktester Digital checks nozzle condition, drop formation and waveform; comparing results before and after cleaning shows objectively whether the head is ready to return to the line.

Heads running which inks can be cleaned?

Recipes are available for heads running oil-based (including ceramic), solvent-based, water-based and UV inks. The cleaning fluid is selected according to the ink used.

When does a printhead cleaning system pay back?

Payback depends on annual head consumption and the number of heads recovered; in high-consumption plants it drops to around 6–8 months. We calculate it with your head consumption data.

Let’s plan cleaning and testing for your Toshiba heads

Share your head model, ink type and annual head consumption; we will evaluate the right solution and payback together.

Contact us People & Technology