Vibrating Sieves for the Ceramic Industry: Slip, Glaze, Engobe and Powder Screening

In ceramic production, a large share of rejects, glazing applicator clogging and unplanned stoppages comes from material that has been screened incorrectly or contains iron. With the vibrating sieves and iron removers of our solution partner Vibrotech Srl (Certech Group), we select the right screening system for every process step, from slip to glaze and spray-dried powder.

Sieve selection by process step

Slip screening

Circular sieves that have been the reference for slip screening for more than 25 years; suitable for 24/7 operation.

  • VBL 900-1200-1500 and VBL 2500
  • VBM series: slip and waste water
  • Single and double deck versions

Glaze, engobe and flaming

Circular sieves for highly viscous liquids, suited to glazing lines.

  • VSL 450-1500 with height-adjustable trolley
  • Tank-side VSL 250, quick-connect VSF 450
  • VSL 600/900 with ABS body

Spray-dried powder and dry materials

Screening of spray-dried powder behind the press and classification of powders/granules.

  • VBA and VBA2: automatic screening behind the press
  • VBP: automatic mesh cleaning
  • VB2: micronized powders and colourants

Iron removal

Magnetic separation together with screening, for liquids and dry materials.

  • FG electromagnetic filters (slip, glaze, recovery water)
  • CEM and DEMOTRON: spray-dried powder and raw material belts
  • OVERBELT magnetic separator
Vibrotech VSL glaze sieve
Glazing line

Vibrating sieves for glazes and engobes

On the glazing line, sieve selection depends on glaze viscosity, flow rate and tank layout. The mobile TRS, TSC, TSE, TSM and TSP units combine mill discharge, screening, iron removal and glaze transfer on a single trolley.

  • Screening and iron removal at mill discharge
  • Tank feeding at the line
  • Screening of applicator return

Vibrotech / Certech

Vibrotech vibrating sieve range
Body preparation

Screening systems for slip and powder

For slip sieves, capacity, mesh opening and number of decks are decisive; for powder sieves, moisture, particle size and line layout. For coarse screening, the rectangular VAR 600 x 900 and VAR 900 x 1200 are available with optional polyurethane wear grids.

  • Screening before slip tanks
  • Waste water and recovery lines
  • Powder control before press feeding

Vibrotech / Certech

How we work

  • Pre-assessment: based on material type, flow rate, viscosity or moisture, target mesh opening and layout, we define the right series and mesh.
  • Laboratory testing: where needed, performance tests are run on your material in Vibrotech’s laboratory in Italy and reported.
  • Commissioning and service: spare parts such as meshes, springs and gaskets, and periodic maintenance support.
  • Complementary solutions: ink storage and automatic feeding for digital printing lines (Ink Refill Technology).

Reference installations

Some of the plants using Vibrotech screening and iron removal systems:

  • Ceramics: NG Kütahya Seramik, VitrA, Anka Seramik
  • Ink distribution system: Anatolia Seramik
  • Metal powder: Saykar Metalurji

Contact us for a process assessment →

What makes Vibrotech sieves different?

  • Thicker body: body bands are made of 2 mm certified AISI 304 L stainless steel sheet; most sieves on the market use 1.5 mm.
  • Pickling and passivation instead of sandblasting: surfaces are not sandblasted after welding. Iron shot used in sandblasting can leave iron residues that cause rust and iron contamination of the product.
  • Stainless steel flanges and base: no rust, seized bolts or leaks that can develop over time with iron or galvanised flanges and bases.
  • Plasma welding and rotational bending: flanges are formed by bending, preventing spring and flange breakage.
  • Efficient vibrator motors: SKF bearings, 600-hour salt spray tested; they draw roughly half the current of equivalent motors (0.85 A vs 1.45 A).
  • Made in Italy, 24-month warranty: all equipment is manufactured in Italy.

In short, the difference pays back as less downtime, less maintenance and longer equipment life.

Frequently asked questions

What is the difference between a slip sieve and a glaze sieve?

Slip sieves are designed for continuous high-flow operation in body preparation. Glaze and engobe sieves are more compact units for highly viscous liquids, suited to the glazing line and tank layout.

How is the mesh opening selected?

The mesh opening is selected according to the particle size distribution of the material, the target product quality and the flow rate. Where needed it is confirmed by testing with a sample.

Can vibrating sieves run 24/7?

Yes. Vibrotech VBL and VBM slip sieves are designed for continuous 24/7 operation.

Can screening and iron removal be combined?

Yes. In mobile units and in-line systems, screening and magnetic iron removal can be combined in the same flow; electromagnetic filters are used for liquids, belt and plate separators for spray-dried powder.

Can you supply meshes and spare parts for existing sieves?

We supply meshes, springs, gaskets and other spare parts for Vibrotech sieves, and evaluate compatibility with other brands together with you.

Let’s select the right screening system for your line

Share your material, flow rate and target mesh opening; we will get back to you with technical catalogue information and an offer.

Request technical information Vibrotech / Certech