Epson Industrial Printhead Cleaning and Testing: i3200, i1600, S3200, S800

Epson i3200 and i1600 heads are used in DTF, UV, eco-solvent and textile printing, while S3200 and S800 heads are used in industrial single-pass and scanning lines. Because of their delicate structure, these heads are particularly sensitive to incorrect cleaning methods. Besides model-specific adapters for Epson heads, Cleanjector uses a patented sealing solution that prevents ultrasound from acting directly on the head.

Supported Epson printheads

Main Epson models that can be processed with Cleanjector and Inktester Digital:

ModelNozzles
i3200 4C A1 / 8C A13200
i3200 4C E13200
i3200 4C U13200
i1600 A11600
i1600 E11600
i1600 U11600
S3200 A1 / A33200
S3200 U1 / U33200
S800 A1800
S800 S1800
S800 U1 / U3800

Other supported models: D3000, EX600-RC, EX1200-RC.

Technical data from the head manufacturer and People & Technology; the model list may change as it is updated.

Common problems with Epson heads

Missing nozzles and lines

Dried or settled ink blocks nozzles, causing lines, colour shifts and missing patterns.

  • Gaps in the nozzle test
  • Jet deviation
  • Reduced drop volume

Ink changeover

When switching to another ink or supplier, residues of the old ink may be incompatible with the new one.

  • Controlled flushing
  • Compatible cleaning fluid
  • Testing after changeover

Long stoppages

Ink drying and pigment settling in the head during maintenance and downtime.

  • Pre-flushing and protection
  • Safe storage
  • Priming before restart

Incorrect cleaning

Pressure above the manufacturer’s limits, unsuitable solvents or cleaning under power can cause permanent damage.

  • Model-specific recipe
  • No power to the head
  • Pressure and vacuum control
Epson printhead cleaning Cleanjector
People & Technology

Cleaning Epson heads with Cleanjector

Cleanjector controls pressure, vacuum, flow direction, temperature, time and ultrasound according to the Epson head model. Cleaning is carried out with closed-loop filtration and backflush; no power is applied to the head during cleaning.

  • Recipes and adapters specific to Epson models
  • Oil, solvent, water-based and UV inks
  • Up to 93% recovery of heads in suitable condition with ceramic inks

Printhead cleaning People & Technology

Epson printhead testing Inktester Digital
People & Technology

Measurable results with Inktester Digital

Whether a cleaned Epson head is ready to return to the line is tested in the lab without stopping production. The same platform is used for new ink approval and incoming head inspection.

  • Nozzle, drop and waveform checks
  • Before / after cleaning comparison
  • Head lifetime tracking

People & Technology

Frequently asked questions

Can a clogged Epson printhead be cleaned?

A significant share of Epson heads without electrical or mechanical damage can be returned to production through controlled cleaning with a model-specific recipe. The head condition is verified by testing before and after cleaning.

What should be considered when cleaning Epson heads?

The manufacturer’s pressure and temperature limits must not be exceeded, a cleaning fluid compatible with the ink must be used and no power must be applied to the head during cleaning. Cleanjector controls these parameters automatically according to the head model.

How do you know a cleaned Epson head is sound?

Inktester Digital checks nozzle condition, drop formation and waveform; comparing results before and after cleaning shows objectively whether the head is ready to return to the line.

Heads running which inks can be cleaned?

Recipes are available for heads running oil-based (including ceramic), solvent-based, water-based and UV inks. The cleaning fluid is selected according to the ink used.

When does a printhead cleaning system pay back?

Payback depends on annual head consumption and the number of heads recovered; in high-consumption plants it drops to around 6–8 months. We calculate it with your head consumption data.

Let’s plan cleaning and testing for your Epson heads

Share your head model, ink type and annual head consumption; we will evaluate the right solution and payback together.

Contact us People & Technology